|Inject-TITE® Fast-Set Epoxy
|Inject-TITE® Adhesive Anchors are available as a Fast-Set Epoxy. It is available in an 8.5 ounce cartridge for small jobs. It fits into a
standard 10 ounce caulking gun. It is also available in a 22 ounce cartridge for larger projects.
A dual-cartridge manual dispensing tool is needed for this size cartridge. Good for hollow block applications !
All-Weather Formula Epoxy Acrylate
|Inject-TITE AWF® All-Weather Formula Epoxy Acrylate works in all base materials including concrete,
brick, and stone masonry. Its working range is from -15° F to 120° F. It will set in
water-filled and damp holes. It is available in an 8.5 ounce cartridge for small jobs,
and a 28 ounce cartridge for larger projects.
|STATIC MIXING NOZZLES
|Available as :
1/2" Nozzle For 8.5 Ounce Cartridge
1/2" Nozzle (Fast-Set or AWF)
|Available For :
22 Ounce Dual Cartridge
28 Ounce Dual Cartridge
|NYLON SCREENS FOR HOLLOW WALL APPLICATIONS
|THREADED STUD ASSEMBLIES
(NUTS & WASHERS INCLUDED)
Threaded studs are used in hollow wall applications with screens, or may be used without
screens in any other application in concrete, masonry, and brick. The studs are available with a
straight cut or a bevel cut. The bevel cut studs are often used with Spin-In Synthetic Mortar
Chemical Capsule Anchor.
|STRAIGHT CUT OR BEVEL CUT
|Slam-TITE® Hammer-In Chemical Capsule Anchors
The Slam-TITE® Hammer-In Chemical Anchor is easy to install. Jjust use a hammer to bang it in. It is extremely
economical, as you only use the amount you require. It is very reliable, as It works in all types of weather. It eliminates
expansion forces, as it can be used close to a free edge.
|* OTHER TEST RESULTS AVAILABLE FOR REINFORCING BAR
|Spin-In Chemical Capsule Anchors
The Spin-In Chemical Anchor has no expansion stress, as the "synthetic mortar" bonds
the stud assembly to the concrete
|CURE TIME FOR SLAM-TITE® AND SPIN-IN CHEMICAL CAPSULE ANCHORS
|8.5 OZ. INJECT-TITE AWF®
|28 OZ. INJECT-TITE AWF®
|22 OZ. TOOL
|28 OZ. TOOL
|1/2" NOZZLE FOR 8.5 OZ.
|1/2" NOZZLE FOR FAST-SET
|1/2" NOZZLE FOR AWF
|DUAL CARTRIDGE MANUAL DISPENSING TOOL