|Our new, improved TOGGLER® hollow-wall anchors, with their patented design, provide the most
secure holding power for light and medium loads. The key-activated positive locking action causes the
anchors to become a rigid, weight-distributing truss in hollow walls.
Fast installation because you can use your screwdriver to make the hole
Very versatile and can be used with any diameter and any type of screw #6 - #14
Protect wall from spalling and breakthrough
|Our SNAPTOGGLE® anchors gets their name from their speed and ease of use.
They work in a SNAP!
Their new longer and stronger plastic straps now work in base materials 3/8" to 3 5/8" thick and will
not break prematurely like other plastic straps.
Their straps snap off flush with the wall every time, assuring precise alignment
Their metal channel pushes aside insulation and has a new plating that is 7x more
corrosion-resistant than B633-85 Type III/Sc 1 government spec high quality zinc plating.
Also available in Type 304 Stainless Steel
|Our ALLIGATOR® solid-wall anchors are the strongest anchors for concrete, brick, and masonry on the
market. They outhold all metal, adhesive, and epoxy anchors of comparable screw size.
The special shape of their heads and the anti-rotation fins prevent the anchor from spinning and
countersinking into the wall. The anchors work even when they hit a hollow cavity in the wall. There is
no need to replace with a hollow-wall anchor! The screw thread locks into the "teeth" in the anchor for
vibration proof and shock proof holding.
|Our new SnapSkru® MINI SPM™ self-drilling drywall anchor is the most technologically advanced
self-drilling drywall anchor ever ! Outholds the competition by over 80% in holding power and load
capacity. Fast and easy to install. NO drill needed ! Makes a tiny 1/4" hole. Head sits flush on the
wall. Works with #6 through #8 screws. Has a built-in "positive-stop" to prevent over-turning.
Locks on the wall. Activates with a "pop" sound indicating correct installation.
Screw can be removed and reinstalled in the same anchor.
Also available as a Kit With Screws
|- TOGGLER® SPECIALTY ANCHORS -
|TBS1® SHELVING ANCHOR
No more fumbling with shelving standards ! The built-in spacer is made to fit flush
with shelving standards (C-channel) to ensure accurate alignment and to prevent the
anchor from being jacked out of the wall during installation.
|TBS2® PEGBOARD ANCHOR
Built-in spacers hold the pegboard the proper distance from the wall to allow peg
hooks to work. The anchors eliminate furring strips, letting you configure the peg
hooks in any arrangement you choose quickly and easily.
|TBW® WIRE SHELF ANCHOR
Designed specifically for wire shelving systems, equipped with a retainer clip locking the
shelving in place. The shelf will not tip, even if the weight is distributed unevenly. Ideal
for use with systems like ClosetMaid®. Perfect for closet systems, kitchen shelves,
garage or workshop shelves.
|TH® HOOK ANCHOR
Built-in hook for hanging paintings, prints, mirrors, etc. When used with a screw in
hollow walls, holds 3x more than old-fashioned nail-in metal picture hooks. The weight
of the picture rests on the screw, preventing pull-out. Corrosion-proof for hanging
fixtures in humid areas. Works in hollow, thick, and solid walls.